How Tall Is A Frigidaire Fridge In Feet: Height Guide

A full-size Frigidaire refrigerator is usually about 5.5 to 6 feet tall. Many top-freezer, side-by-side, and French-door models measure between 66 and 70 inches, which equals 5 feet 6 inches to 5 feet 10 inches.

The exact height depends on the model, style, hinges, and leveling feet. A compact Frigidaire fridge may be only 2.5 to 4 feet tall, while a tall built-in or specialty model can be close to or above 6 feet.

Common Frigidaire Refrigerator Heights

Most full-size Frigidaire refrigerators fall within a fairly narrow height range. The best estimate for a standard household model is roughly 5 feet 6 inches to 5 feet 11 inches.

Use this table as a general guide:

Frigidaire refrigerator type	Common height in inches	Height in feet
Compact refrigerator	30–50 inches	2.5–4.2 feet
Top-freezer refrigerator	60–70 inches	5–5.8 feet
Bottom-freezer refrigerator	67–70 inches	5.6–5.8 feet
Side-by-side refrigerator	67–70 inches	5.6–5.8 feet
French-door refrigerator	68–70 inches	5.7–5.8 feet
Large or specialty refrigerator	70–72+ inches	5.8–6+ feet

These are typical ranges, not exact measurements for every Frigidaire product. Some models have a taller cabinet, larger door hinges, or adjustable legs that change the listed height.

For a quick estimate, 70 inches divided by 12 equals 5.83 feet. In everyday terms, that is 5 feet 10 inches.

How to Convert a Frigidaire Fridge Height to Feet

To convert the height listed in inches, divide the number of inches by 12.

Basic formula

Height in feet = height in inches ÷ 12

For example:

• 66 inches ÷ 12 = 5.5 feet
• 68 inches ÷ 12 = 5.67 feet
• 70 inches ÷ 12 = 5.83 feet
• 72 inches ÷ 12 = 6 feet

You can also convert the result into feet and inches:

• 66 inches = 5 feet 6 inches
• 67 inches = 5 feet 7 inches
• 68 inches = 5 feet 8 inches
• 69 inches = 5 feet 9 inches
• 70 inches = 5 feet 10 inches
• 71 inches = 5 feet 11 inches
• 72 inches = 6 feet

The decimal form helps with calculations. Feet-and-inches form is usually easier when checking a kitchen opening.

How to Find the Exact Height of Your Frigidaire Refrigerator

The model number is the most reliable way to find the exact height. Frigidaire sells many refrigerators with similar names but different dimensions.

Look for the model number in one of these places:

• On a label inside the refrigerator compartment
• Along the inside wall near the door
• On the original product receipt
• On the owner’s manual
• On the product label at the back or side of the unit

Once you have the model number, check the Specifications, Product Dimensions, or Installation Instructions section on the official Frigidaire website.

Pay attention to these separate measurements:

• Height with hinges
• Height without hinges
• Cabinet height
• Width with doors
• Depth with handles
• Depth without doors or handles

The number called “height with hinges” is usually the measurement that matters when checking whether the refrigerator will fit beneath a cabinet.

A product page may list a measurement such as 69 7/8 inches. That equals about 5 feet 9 7/8 inches, or 5.82 feet.

Does the Listed Height Include the Hinges?

Usually, refrigerator specifications provide more than one height measurement. The height with hinges includes the top hinge covers and is often slightly greater than the cabinet height.

This difference may be small, but it matters when the refrigerator must slide under a low cabinet or countertop.

For example:

Measurement	Example
Cabinet height	68 5/8 inches
Height with hinges	69 7/8 inches
Difference	1 1/4 inches

If your available opening is 70 inches, a refrigerator listed as 69 7/8 inches may technically fit. However, the fit could be too tight for easy installation or leveling.

Leave extra space when the manufacturer’s installation guide requires it. The needed clearance depends on the model and may be required for:

• Door movement
• Air circulation
• Hinge operation
• Leveling
• Removing the refrigerator for service

Do not assume that a refrigerator will fit simply because its cabinet height is below the opening. Use the larger listed height when planning the installation.

How Much Space Should You Leave Above a Frigidaire Fridge?

The required top clearance varies by model, so the installation guide should control. A small gap above the refrigerator may be enough for one model but not another.

Before buying or moving the appliance, measure:

1. The floor-to-ceiling height of the opening
2. The height at the front and back of the opening
3. Any trim, molding, or cabinet lip above the refrigerator
4. The height of the refrigerator with its hinges and leveling feet
5. The space needed to tilt or move the refrigerator into place

A refrigerator may need to be tilted during delivery. If the opening is only slightly taller than the appliance, the unit might not be able to enter the space even if it fits once upright.

The floor also matters. An uneven floor can reduce the usable height on one side. Measure at several points instead of relying on one measurement.

As a practical rule, do not plan around an exact fit. A refrigerator that is 69 7/8 inches tall may be difficult to install in a 70-inch opening, especially if the floor is uneven or the cabinet is not square.

How Tall Is a Frigidaire Fridge With the Doors Open?

Opening the doors does not usually increase the refrigerator’s vertical height, but it does increase the space needed in front and beside the appliance.

This matters when the refrigerator sits beneath:

• A low cabinet
• A soffit
• A shelf
• A wall-mounted microwave
• A narrow doorway
• A kitchen island

French-door and side-by-side refrigerators need enough room for their doors to swing. Some models allow the doors to open with limited side clearance, while others need more space.

Check the manufacturer’s installation instructions for:

• Door-opening clearance
• Handle clearance
• Wall clearance
• Door removal requirements
• Minimum space for drawers to extend

A refrigerator can fit the opening but still be difficult to use if the doors hit a wall or cannot open wide enough to remove shelves and drawers.

How to Measure for a Frigidaire Refrigerator

Measure the opening before choosing a model. Do not measure only the old refrigerator, because the new appliance may have different hinges, handles, or door clearance.

Measure the height

Measure from the floor to the lowest point of the cabinet, shelf, or trim above the refrigerator. Take measurements at the left, center, and right sides.

Use the shortest measurement.

Measure the width

Measure the opening at the top, middle, and bottom. Use the narrowest measurement. Wall surfaces and cabinets are not always perfectly straight.

Measure the depth

Measure from the back wall to the front edge of the counter or cabinet. Account for:

• Door thickness
• Handles
• Water lines
• Power cords
• Ventilation space
• The distance needed to open the doors

Measure the delivery path

Check the width and height of:

• Exterior doors
• Interior doors
• Hallways
• Stairs
• Turns
• Elevator doors, if applicable

Remove door trim only if necessary and only when it can be done safely. If the delivery path is tight, ask the retailer or delivery company about door removal and reinstallation before delivery.

Sample Height Calculations

Here are common examples of how Frigidaire refrigerator heights convert to feet:

Listed height	Exact feet calculation	Everyday description
65 inches	65 ÷ 12 = 5.42 feet	5 feet 5 inches
66 5/8 inches	About 5.55 feet	5 feet 6 5/8 inches
68 inches	5.67 feet	5 feet 8 inches
69 7/8 inches	About 5.82 feet	5 feet 9 7/8 inches
70 inches	5.83 feet	5 feet 10 inches
72 inches	6 feet	6 feet exactly

A decimal such as 5.83 feet does not mean 5 feet 83 inches. The decimal represents part of a foot. To convert the decimal part into inches, multiply it by 12.

For example:

• 0.83 × 12 = about 10 inches
• Therefore, 5.83 feet is about 5 feet 10 inches

Common Mistakes When Checking Refrigerator Height

The most common mistake is using a general size estimate instead of the exact model specification. Two Frigidaire refrigerators with the same door style may not have the same height.

Other mistakes include:

• Measuring the cabinet but ignoring the hinge
• Forgetting the adjustable leveling feet
• Measuring only one side of an uneven opening
• Ignoring a cabinet overhang
• Assuming the delivery path is wide enough
• Forgetting door and handle clearance
• Treating a decimal foot measurement as feet and inches
• Leaving no room for leveling or service

Do not remove refrigerator doors or alter cabinets unless you understand the procedure and have the right tools. Refrigerators are heavy, and incorrect handling can damage hinges, wiring, water lines, flooring, or the appliance.

If the refrigerator needs a water connection or electrical work, follow the manufacturer’s instructions. Use a qualified professional when the installation involves changes to household wiring, plumbing, cabinets, or structural components.

What Is the Best Height for a Replacement Frigidaire Fridge?

The best height is the tallest model that fits the opening with the manufacturer’s required clearance. A taller refrigerator may offer more storage, but it can create installation and service problems if the fit is too tight.

For most standard U.S. kitchen spaces, a model around 66 to 70 inches tall is common. A compact model may be better for a garage, office, apartment, basement, or guest room.

Choose based on the actual opening rather than the refrigerator’s advertised capacity. A refrigerator with more cubic feet is not useful if it blocks cabinets, cannot open fully, or cannot pass through the doorway.

Before ordering, compare these three numbers:

1. The shortest height of the opening
2. The refrigerator’s height with hinges and feet
3. The clearance required by the installation guide

The refrigerator should meet all three conditions, not just the first two.

Frequently Asked Questions

Is a Frigidaire refrigerator 6 feet tall?

Some Frigidaire refrigerators are about 6 feet tall, but many full-size models are slightly shorter. A refrigerator listed at 72 inches is exactly 6 feet. Models around 68 to 70 inches are about 5 feet 8 inches to 5 feet 10 inches.

How tall is a Frigidaire top-freezer refrigerator?

A full-size Frigidaire top-freezer refrigerator is commonly about 60 to 70 inches tall, or approximately 5 to 5 feet 10 inches. The exact height depends on the model and whether the measurement includes the hinges.

How tall is a Frigidaire mini fridge?

A Frigidaire compact or mini refrigerator may be about 30 to 50 inches tall, or roughly 2.5 to 4.2 feet. Check the model specifications because compact units vary widely in size.

Can I put a Frigidaire refrigerator under a cabinet?

Yes, if the refrigerator’s height and required clearances fit the opening. Compare the opening with the model’s height with hinges, then check the installation guide for top, side, rear, and door-opening clearance.

Where can I find my Frigidaire refrigerator’s height?

Find the model number on the label inside the refrigerator, then search that model on Frigidaire’s official website. The product specifications and installation guide should list the exact height.

Conclusion

Most full-size Frigidaire refrigerators are approximately 5.5 to 6 feet tall. A useful starting estimate is 66 to 70 inches, or 5 feet 6 inches to 5 feet 10 inches.

For an accurate answer, use the exact model number and check the listed height with hinges and leveling feet. Then measure the opening, delivery path, and required clearance before buying or installing the refrigerator.

The safest next step is simple: write down your opening’s shortest height and compare it with the official installation dimensions for the Frigidaire model you want.